Contorta

Hello there!

2020 has been the worst. 

I am still here (in my own quiet way) just being me.

I do hope that you have been spared the worst and you are also able to just be you.

I did not yet post to my blog about Contorta...

I love this top over (over the top) photo.

Beautiful depth.

This was my "pine tree story" which was one of 11 "modern, minimalist" patterns featured in Issue 2 of Making Stories Magazine. The magazine was released in October 2019. I now have the rights to the design.  

 

This pattern will be one of 18 that will be offered in my Ravelry store at a 25% discount from Nov 24 to Nov 30 2020.

Thank you for reading and sorry it has been a while......... 

 

New Design: SIDEREAL CHECK COWL

I have released my new stranded colorwork design, SIDEREAL CHECK COWL as promised. It is a companion piece to my recently released SIDEREAL CHECK HAT.  The pattern is available on Ravelry with a 25% introductory discount through midnight (EST) December 16.

As I mentioned in my last post, I was very fortunate to have my designs selected for yarn support by The Fibre Co as part of Autumn/Winter Yarn Support Programme. Their gorgeous, Arranmore Light is a new favorite of mine. It blends cashmere and silk with merino wool to create an autentic tweed yarn of the highest quality.

The reversible cowl, with one side in stranded colorwork and the other in a two-row stripe, has picot edgings. It begins with a provisional cast on and ends with three-needle bind off.

Finished Measurements 
33” 84 cm circumference and 9½” 24 cm height

Yarn
DK weight yarn 
348 yd 318 m Main Color (MC)
180 yd 165 m Contrast Color (CC)

Note: If making both hat & cowl with Arranmore Light, two skeins of the main color and one of the contrast color will be more than enough.

Thanks for reading!

xoxox

New Design: SIDEREAL CHECK HAT

I am happy to finally introduce my new stranded colorwork hat pattern in two sizes, SIDEREAL CHECK HAT. This pattern is available on Ravelry with a 25% introductory discount through midnight (EST) December 2.

Earlier this year, I was thrilled to learn that I had been selected for The Fibre Co’s Yarn Support Programme AW 18/19. Their Arranmore Light blends cashmere and silk with a fine merino wool to create an authentic tweed yarn of the finest quality. I have always loved colorwork with tweed yarns.

I actually received yarn support for both the hat and a coordinating cowl that will be released two weeks from today, on December 13. These colorwork projects were inspired by high fashion garments featuring graphic variations of houndstooth check. I enjoyed charting some of these checks for stranded knitting.

The check pattern I use here was one of my favorites. I love how the background color appears as a series of four-pointed stars. ‘Sidereal’ means of or relating to distant stars or constellations.

The hat, with optional pompom, may be made in one of two sizes to fit most women (men).

Finished Measurements
18¼ (19¾)” 46.5 (50) cm un-stretched brim circumference and 10¾ (11¾)” 27.5 (30) cm un-cuffed height, will stretch to fit heads up to approximately 22 (24)” 56, (61) cm

Yarn
DK weight yarn
For hat:
152 (178) yd 139 (163) m Main Color (MC)
38 (44) yd 35 (40) m Contrast Color (CC)
For optional 3⅜” (8.5 cm) pompom:
additional 43 yd 39 m CC

Note: If making both hat & cowl with Arranmore Light, two skeins of the main color and one of the contrast color will be more than enough. (Arranmore Light has an amazing 328 yds per skein.)

Thanks for reading!
xoxox

New Design: TRINITY MOUNTAIN HAT

My latest design, Trinity Mountain Hat, was recently released by Green Mountain Spinnery. It was a fun and colorful project!

I designed the hat to show off GMS's brand new DK weight Ragg-Time yarn. This 100% wool yarn comes in many stunning colorways.

The "Holiday" colorway, on top above, was sent for me to work with for my hat design. This colorway is actually more of a gradient yarn with long lengths of color that do not repeat within one skein. This became evident once I wound my skein into a ball.

I selected a highly-textured stitch pattern most commonly known as Trinity Stitch.

The stitch pattern continues through the decreasing of the crown. The pompom is optional.

Details

Finished Measurements

13¼ (16½, 19¾)” / 33.5 (42, 50) cm un-stretched circumference
 (will stretch to fit heads up to approximately 19 (22, 25)” / 48.5 (56, 63.5) cm).
  10½ (11½, 12)” / 26.5 (29, 30.5) cm un-cuffed height.

Yarn250 - 300 yards (229 - 274 m) DK weight yarnOne skein of Green Mountain Spinnery Ragg-Time will be enough to make a hat in either of the two smaller sizes along with a pompom similar in size to sample hat.
 If making the largest size hat, a smaller pompom could be made.

Needles

                 - Size US 3 [3.25 mm] needles: 16” circular (cir) 

                 - Size US 6 [4.0 mm] needles: 16” circular (cir) and set of double-pointed (dpn).

Adjust needle size if necessary to obtain the correct gauge.

View the Trinity Mountain Hat on Ravelry for more information.

Both pattern and yarn are available at the Green Mountain Spinnery website.

Also see this GMS blog post for more information on Ragg-Time yarn and other ideas for using it.

Thanks for reading!
xoxox 

New Design: NO-WRONG-SIDE Hat

NO-WRONG-SIDE Hat
(right side when knitting)

I am very happy to introduce my bulky weight, reversible (2-hats-in-1), design in three sizes, NO-WRONG-SIDE Hat.

Earlier this year, I was thrilled to learn that I had been selected for The Fibre Co’s Fall 2017 Yarn Support Programme! The Fibre Co's Tundra is the the perfect blend of baby alpaca, merino and silk, worked into a 2-ply that gives it a pleasing, well-rounded appearance for great stitch definition. Though a bulky yarn, it is very light in weight, lofty and extremely warm. It is perfect for the deep texture / cable stitch pattern of the No-Wrong-Side Hat.

This design was originally sparked by the photo of the “Sunburst Check” stitch pattern on page 202 of A 2ND TREASURY OF KNITTING PATTERNS by Barbara G Walker. I was fascinated by the depth of texture in the photo. The poofs of stockinette push strongly forward leaving little pockets of reverse stockinette like pools beneath them. 

When I swatched this stitch pattern, I was quite surprised to find that the reverse side of the fabric was a stitch pattern in itself – a very fluid rib-cable. It did not look like the “wrong side” of a piece of knitting. I worked out a double brim that compliments both sides of the hat. I also created a decreasing crown that flows from the stitch pattern on both sides of the hat.

NO-WRONG-SIDE Hat
(reverse side when knitting)

The brim of the hat is folded on a purl ridge and knit together creating a double layer brim. This requires a provisional cast-on and a later “knitting two layers together round” (much like three-needle-bind-off, but with both knit and purl stitches). Next there is an increase round with specific purl increases. For the remainder of the hat, both charted and written directions are provided.

Hat swatch showing purl ridge and double layer brim,
(knit with Tundra in the Boreal colorway).

PATTERN DETAILS

Finished Measurements
15½ (18¼, 20¾)” [39.5 (46.5, 52.5) cm] circumference and 8¼” [21 cm] high,
will stretch to fit heads up to approximately 19 (22, 24)” [48.5 (56, 61) cm].

Yarn
Bulky weight yarn,
approximately 96 (112, 128) yd [88 (103, 117) m] for hat.

Shown in:
The Fibre Co. Tundra (60% alpaca, 30% wool, 10% silk; 120 yd [110 m], 100 g)
 Tiaga colorway, 1 (1, 2) skein(s).

Needles
- Size US 9 [5.5 mm] needles: 16” [40 cm] circular (cir).
- Size US 10.5 [6.5 mm] needles: 16” [40 cm] circular and set of double-pointed (dpn). Adjust needle size if necessary to obtain the correct gauge.
- Spare US 9 [5.5 mm] or smaller 16” [40 cm] cir needle to hold hem stitches.

My No-Wrong-Side Hat pattern has been carefully written and tech-edited.

Three of my local knitting friends kindly and helpfully agreed to test the pattern in the Fibre Co Tundra. After which, I ran a successful second test knit on Ravelry. (I love all of my test knitters!)

This pattern is now available on Ravelry at an introductory reduced price of $3.75 until the end of the day (11:59 EST) December 4. After that, the pattern will be available at its regular price of $5.00.

My No-Wrong-Side Hat is a fun and quick-to-knit project... perfect for gift knitting. Because I am a participating designer in the Ravelry Indie Gift-A-Long, this hat is an eligible pattern for participation in the GAL2017 HATS & OTHER HEAD THINGS KAL/CAL, where you will find all the love and support you could wish for... as you finish your own gift knitting goals... along with fun games and many prizes.

Thanks for reading!

Thanks for your support of indie designers!!!
xoxox 

New Design: GODIVA MITTS

Godiva Mitts

I am very happy to have just released my latest indie design, GODIVA MITTS. Like most of my designs, it has been a long time coming...

The spark began last spring when I focused on the diamond shape of a single ‘aran’ fishermen’s style cable... I was looking at one beautiful cable, and I thought of fitting it onto the back of a hand to make a mitt -- allowing its gently tapering width to enhance the shaping of the mitt.

I had the image of a small, dainty, fitted mitt and I knew that I wanted it to be sweet and feminine. I decided to fill the cable with some lacy open-work.

Swatch on Hand

I charted and then swatched the cable panel using a skein of yarn in my stash, Knit Picks Capretta in the Cream colorway. Then, somewhere in between August and September I made the first pair of Godiva Mitts. 

First Godiva's in Knit Picks Caprette

My friends at Gosh Yarn It! loved them when I brought them in on a regular Thursday "knit night" in October.

After other design obligations were met, I made the second pair of Godiva's using a single skein of Mango Moon Mulberry Meadow in the Rain Cloud colorway. These have a longer cuff -- a simple change, but one that gives the mitts a different look.

Longer cuffed mitts in Mango Moon Mulberry Meadow

Details

Finished Measurements

7½” [19 cm] un-stretched circumference (measured at widest point).
The cream-colored mitts are 7” [18 cm] long, with a  2½” [6.5 cm] cuff.
The gray mitts are 8½” [21.5 cm] long, with a 4" [10 cm] cuff.

Yarn
140 yd [128 m] of fingering weight yarn for shorter cuff

175 yd [160 m] of fingering weight yarn for longer cuff

Needles
Size US 2 [2.75 mm] needles (two circular or set of double-pointed)

 Adjust needle size if necessary to obtain the correct gauge.

My Godiva Mitts pattern has been carefully written and tech-edited, after which I ran an extremely successful test knit on Ravelry. I love my test knitters!

This pattern is available on Ravelry at an introductory reduced price of $3.75 until midnight (GMT) July 21. After that the pattern will be available at its regular price of $5.00.

Thanks for reading!
xoxox